Calibration of Precision Gimbaled Pointing Systems

Corrections of pointing data provided by gimbal readout transducers can be used to compensate for the errors that arise because of gimbal misalignments and inaccuracies in transducer readout. This paper reviews the sources of pointing error in precision gimbaled pointing systems and describes the techniques for determining them. In particular, a method of calibration that is suitable for systems in which constraints on gimbal travel preclude the use of conventional calibration procedures is presented, and the pointing readout accuracy that can be achieved by this method is evaluated.     

Angular Accuracy of a Scanning Radar Employing a Two-Pole Filter

A two-pole filter is proposed as a detector for a scanning radar. The optimum values of the filter coefficients are found and are approximated by a simple expression. The optimum two-pole filter requires a 0.15-dB increase in signal-to-noise ratio in order to provide the same detection capability as the optimum detector, and yields azimuth estimates whose standard deviation are within 15 percent of the Cramér-Rao lower bound. The estimator is simple to implement, avoiding the storage requirements of the moving window detector and the bias complications of the feedback integrator.     

On Optimal Control of Linear Systems in the Presence of Multiplicative Noise

This correspondence considers the problem of optimal regulator design for discrete time linear systems subjected to white state-dependent and control-dependent noise in addition to additive white noise in the input and the observations. A pseudo-deterministic problem is first defined in which multiplicative and additive input disturbances are present, but noise-free measurements of the complete state vector are available. This problem is solved via discrete dynamic programing. Next is formulated the problem in which the number of measurements is less than that of the state variables and the measurements are contaminated with state-dependent noise. The inseparability of control and estimation is brought into focus, and an "enforced separation" solution is obtained via heuristic reasoning in which the control gains are shown to be the same as those in the pseudo-deterministic problem. An optimal linear state estimator is given in order to implement the controller.     

Target Identification by Natural Resonance Estimation

This paper presents a target identification method based on an estimation of the natural frequencies of oscillation in transient radar signatures. The emphasis is placed upon signal modeling and estimation ation strategy rather than relating resonance locations to physical structures. Salient features of this identification method are: 1) target aspect angle is not needed, 2) multiple targets of the same type can be illuminated simultaneously, and 3) bandpass interrogation ion pulses can be used. The latter feature is compatible with existing radar facilities. The method is applied to some simulated transfer functions, and factors affecting estimate accuracy are discussed.     

Ground Testing of Inertial Navigators to Improve Dynamic Performance

A ground testing method has been devised to evaluate the dynamic errors of an inertial navigation system. A trimmed stationary inertial system in the navigation mode can be subjected to programmed platform orm drift rates, and generate position outputs which are compared with those of a perfect navigator. The linearized error equations for this testing mode are derived and the resulting position error propagation is analyzed using Kalman filtering in order to identify the error sources. A simulated platform with a fixed set of error sources is analyzed to evaluate this testing concept. An example is presented to show that the gyro and accelerometer scale factor and misalignment error coefficients can be estimated.     

Pure proportional navigation against time-varying target manoeuvres

Capturability of the pure proportional navigation (PPN) guidance law against a target executing bounded piecewise continuous time-varying manoeuvres is investigated. A qualitative analysis is carried out to obtain a set of sufficient conditions for capture defined on the engagement parameters and initial conditions. These conditions are significantly less restrictive than the ones obtained previously by others using the Lyapunov method. It is shown that the actual capture region for time-varying target manoeuvres, obtained by using the conditions derived, is much larger than that obtained from the Lyapunov technique. We also show that though a bounded tine varying target manoeuvre does change the constant target manoeuvre capture region to some extent, it does not reduce it drastically. Further, we show that the worst case capture region is obtained when the target executes a constant manoeuvre equal to the bound on the manoeuvre level. Some bounds on the missile lateral acceleration are also obtained for certain regions in the engagement plane. These results are generalizations and extensions of existing results on the capturability of the PPN guidance law against targets executing constant or time-varying target manoeuvres     

FUZZY PETRI NET FOR FAULT DIAGNOSIS

ＦＵＺＺＹＰＥＴＲＩＮＥＴＦＯＲＦＡＵＬＴＤＩＡＧＮＯＳＩＳＷｕｙａｎｆａｎｇ；ＷｅｉＺｈｏｎｇｘｉｎ．（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏ...     

An interacting multiple model approach for target tracking withglint noise

The application of the interacting multiple model (IMM) estimation approach to the problem of target tracking when the measurements are perturbed by glint noise is considered. The IMM is a very effective approach when the system has discrete uncertainties in the dynamic or measurement model as well as continuous uncertainties. It is shown that this method performs better than the “score function” method. It is also shown that the IMM method performs robustly when the exact prior information of the glint noise is not available     

快冷态与铸态Ti—55合金稀土相的研究

采用透射电镜观察了快冷态Ｔｉ－５Ａｌ－４Ｓｎ－２Ｚｒ－１Ｍｏ－０．２５Ｓｉ．０．３～１．２Ｎｄ合金（Ｔｉ－５５合金）稀土相的形貌，发观稀土相尺寸细小（４～３４ｎｍ），呈球状，均匀弥散地分布在基体中，晶界上稀土相呈椭球状，沿晶界排列。采用图像分析仪对铸态Ｔｉ－５５合金稀土相进行了分析，结果表明，４种成分合金的稀土相平均尺寸为３．２５～３．５０μｍ，平均圆度系数为０．５６～０．６３，呈椭球状，棒状及不规则状，分布于晶界与晶内，其均匀弥散度劣于快冷态Ｔｉ－５５合金的稀土相。